In this video, we'll show you how to apply grease to the steam wand.

This is necessary when the steam wand movement becomes stiff.

This video is part of a series that we produce, helping our users self-repair their Decent Espresso Machine.

Only do this repair in consultation with Decent tech support

Doing otherwise might break your machine or void your warranty.

---

Chapters:

1. 00:04 Tools

2. 00:09 Power Disconnection

3. 00:29 Remove External Components

4. 01:02 Wait until the steam wand parts have cooled down

5. 01:11 Remove the steam wand

6. 01:35 What you'll find inside the steam wand

7. 01:40 Apply grease

8. 01:49 Re-mount the steam wand

9. 02:25 Contact us with questions

---

Instructions on how to apply grease to the steam wand

---

Tools Needed

2 x Adjustable wrenches or 22mm and 26mm wrenches.

Food-grade lubricant grease rated at over 200ºC.

Cloth

Comfort Grip Gloves

---

Step 1: Power Disconnection

For DE1XL or DE1XXL Models:

1. Remove the back panel.

2. Turn off the machine's back switch.

3. Unplug the power cord.

For DE1PRO and DE1PLUS Models:

1. Turn off the machine's back switch.

2. Unplug the power cord.

---

Step 2: Remove External Components

For v1.43 or higher (slide-in tablet stand):

1. Unplug the USB cable.

2. Gently pull the tablet stand out.

For v1.3 to v1.42 (screwed-in tablet stand):

1. Unscrew the 3 screws holding the tablet stand.

2. Remove the stand.

Then...

1. Remove the portafilter.

2. Remove the group head handle.

---

Step 3: Disassemble the Steam Wand

Warning: If you have just finished steaming, allow the steam wand and top nuts to cool completely before starting.

1. Hold the outside nut with an adjustable wrench or a 26 mm wrench, and use another adjustable wrench or a 22 mm wrench to loosen the ball joint nut.

2. Fully unscrew the ball joint nut by hand. Wear comfort-grip gloves if you need extra grip.

3. Inside the ball joint nut, locate the steam wand joint and remove the spring carefully.

---

Step 4: Apply Lubricant Grease

Using a cloth, apply food-grade grease to the rounded end of the steam wand and to the end of the spring where it contacts the joint.

---

Step 5: Assemble the Steam Wand

1. Place the spring back into position and set the joint on top of it.

2. Position the rounded end of the steam wand onto the joint, press the wand inward to compress the spring, and engage the thread

3. Screw the ball joint nut on by hand

4. Then hold the outside nut and secure the ball joint nut with the wrenches.

---

Step 6: Final Check

1. If you have any questions, contact our tech support.

#repair #howto #DIY #documentation